VTA-1215A-G

Feature:

Ensure power supply for equipment to operate stably when providing 24/7 service
Make sure not to affect the device when there is a power outage or continuous on and off
The output overvoltage protection threshold of the Adapter is in the range from 120% to 150%
Output over-current and short-circuit protection: The adapter will stop working when operating in over-current, short-circuit protection mode and work again when the output is no longer overcurrent or short-circuited.
Nominal current of the adapter: is the value of the adapter's current stable operation when the output load current reaches >=250% of the average load current of the device when fully serviced.
Insulation between input (AC) and output (DC): ≥ 1.5kV, leakage current < 0.25mA: (at least 3s withstand test)
Insulation Resistance: min 100 MΩ(Input to Output, DC 500V)
Standards: EN61000-4-4, EN61000-4-5, IEC60950.

Rated Input Voltage: Rated operating voltage 100Vac to 240Vac input AC voltage
Input Voltage Range: Operating voltage range 90Vac to 264Vac and the rang, the unit shall work normally
Rated Frequency: Input rated AC voltage frequency range 50Hz or 60Hz and single phase
Frequency Range: Input AC voltage frequency range 40Hz to 80Hz
The input limit current: is 500mA（Max) under minimum ac 90V
input and full load
Inrush Current: 30A (Max)
Power In (AC) Plug: 2 pins or 3 pins, round or flat pins

- Length 1m ~ 1.8m (1.0m, 1.2m, 1.5m, 1.8m)

- Flexible double wire, copper conductor cross-section suitable for rated power (<=6A/mm2)