VT-42-OFI 200A

VT-42-OFI 200A Optical Fiber Identifier uses macro bending technology to carry out nondestructive test on the line，Signal direction and approximate power can be detected at any position of SM/MM fibers. Avoid line interruption caused by misoperation.

Macrobending measurement：The weak optical signal is exposed when the optical fiber is bent，The direction and intensity of the optical signal are detected by judging the direction and intensity of the leakage. No damage to optical fiber and no interruption of communication，It can directly detect 0.25mm bare optical fiber, 0.9mm tight sleeve optical fiber and 3mm jumper.

VFL：The recognizer can be equipped with 10mW VFL to find the fault point of 10km (laboratory value) line.

Low battery monitoring：When the battery is low, yellow or red prompt will be sent to remind the user to replace the battery to avoid interruption of use.

Features

No need to cut off the optical fiber ,can effectively identify the direction and frequency
Universal fixture, bare fiber, pigtail, etc. No need to replace the adapter
Identify three common signal, 2kHz/1kHz/270Hz, beep prompt during recognition
LED indicator is simple and clear
With the "one touch" operation mode, the operation is simple and convenient
Can test the optical power of the measured optical fiber
Using No. 9 dry battery, Low power consumption, Small volume, Easy to carry
High transmittance VFL, Easily penetrate long-distance optical fiber, find the fault point

HOHUI Tech

VT-42-OFI 200A Optical Fiber Identifier

Features

DOWNLOAD